XW6
- Индикаторы делают процесс коммутации простым и наглядным. Правильная проводка без привлечения опытных операторов.
- Простая проверка индикаторов обслуживания проводки позволяет сократить объем работ по техническому обслуживанию.
- Перемычки обеспечивают предварительное подключение общей проводки. Сложная перекрестная коммутация не требуется.
- Лучшие в своем классе тонкие модели позволяют уменьшить размер панелей управления.
- Клеммные колодки с технологией Push-In Plus предотвращают ослабление проводки, обеспечивая бесперебойную работу.
Характеристики и информация для заказа
| Maximum Conductor Cross Section Fine Stranded (mm²) | Number of pins | Color of Short Bars | Weight (g) | Order code |
| 1.5 | 8 | Red | Approx. 16 | XW6T-COM1.5X8RD |
| Blue | XW6T-COM1.5X8BL | |||
| Yellow | XW6T-COM1.5X8YL | |||
| 12 | Red | Approx. 23 | XW6T-COM1.5X12RD | |
| Blue | XW6T-COM1.5X12BL | |||
| Yellow | XW6T-COM1.5X12YL | |||
| 16 | Red | Approx. 29 | XW6T-COM1.5X16RD | |
| Blue | XW6T-COM1.5X16BL | |||
| Yellow | XW6T-COM1.5X16YL | |||
| 20 | Red | Approx. 36 | XW6T-COM1.5X20RD | |
| Blue | XW6T-COM1.5X20BL | |||
| Yellow | XW6T-COM1.5X20YL | |||
| 40 | Red | Approx. 68 | XW6T-COM1.5X40RD | |
| Blue | XW6T-COM1.5X40BL | |||
| Yellow | XW6T-COM1.5X40YL | |||
| 2.5 | 8 | Red | Approx. 28 | XW6T-COM2.5X8RD |
| Blue | XW6T-COM2.5X8BL | |||
| Yellow | XW6T-COM2.5X8YL | |||
| 12 | Red | Approx. 41 | XW6T-COM2.5X12RD | |
| Blue | XW6T-COM2.5X12BL | |||
| Yellow | XW6T-COM2.5X12YL | |||
| 16 | Red | Approx. 53 | XW6T-COM2.5X16RD | |
| Blue | XW6T-COM2.5X16BL | |||
| Yellow | XW6T-COM2.5X16YL | |||
| 20 | Red | Approx. 65 | XW6T-COM2.5X20RD | |
| Blue | XW6T-COM2.5X20BL | |||
| Yellow | XW6T-COM2.5X20YL | |||
| 40 | Red | Approx. 126 | XW6T-COM2.5X40RD | |
| Blue | XW6T-COM2.5X40BL | |||
| Yellow | XW6T-COM2.5X40YL |
Accessories (Order separately)
(For addition) Terminal Block
| Applicable Terminal Blocks | Application | Order code |
| XW6T-COM1.5X⬜⬜⬜⬜ | This is a Terminal Block for addition.
By using it with Short Bars as a set, Addition of the common points is available. Always attach the end cover after addition to prevent electrical shock. (Refer to page 14 for details.) |
XW6T-COM1.5 |
| XW6T-COM2.5X⬜⬜⬜⬜ | XW6T-COM2.5 |
Short Bars
| Applicable Terminal Blocks | Number of poles | Covering color | Application | Order code |
| XW6T-COM1.5X⬜⬜⬜⬜ | 2 | Red (RD)
Blue (BL) Yellow (YL) |
Used for crossover wiring between Terminal Blocks. | XW5S-P1.5-2⬜ |
| 3 | XW5S-P1.5-3⬜ | |||
| 4 | XW5S-P1.5-4⬜ | |||
| 5 | XW5S-P1.5-5⬜ | |||
| 10 | XW5S-P1.5-10⬜ | |||
| XW6T-COM2.5X⬜⬜⬜⬜ | 2 | Red (RD)
Blue (BL) Yellow (YL) |
XW5S-P2.5-2⬜ | |
| 3 | XW5S-P2.5-3⬜ | |||
| 4 | XW5S-P2.5-4⬜ | |||
| 5 | XW5S-P2.5-5⬜ | |||
| 10 | XW5S-P2.5-10⬜ |
End Cover
| Applicable Terminal Blocks | Application | Order code |
| XW6T-COM1.5X⬜⬜⬜⬜ | This part is required to prevent electrical shock.
Attach end covers for the Terminal Blocks before use on the following parts. (Refer to page 14 for details.) Exposed metal surface of the last Terminal Block Any Terminal Block that is next to a different shape of Terminal Blocks. |
XW6E-COM1.5 |
| XW6T-COM2.5X⬜⬜⬜⬜ | XW6E-COM2.5 |
End Brackets
| Width (mm) | Application | Order code |
| 6 | End Brackets are installed on the both ends of the Terminal Blocks to prevent them from moving on DIN Track. | XW5Z-EP6 |
Specifications
Ratings
| Model | XW6T-COM1.5X⬜⬜⬜⬜ | XW6T-COM2.5X⬜⬜⬜⬜ | |||||||
| Applicable wire sizes | Nominal cross section | 0.75 mm² (1.5 mm²) | 2.5 mm² | ||||||
| Minimum conductor cross section solid | 0.14 mm² | 0.14 mm² | |||||||
| Maximum conductor cross section solid | 1.5 mm² | 4.0 mm² | |||||||
| Minimum conductor cross section fine stranded | 0.08 mm² | 0.14 mm² | |||||||
| Maximum conductor cross section fine stranded | 1.5 mm² | 2.5 mm² | |||||||
| Minimum conductor cross section (flex., stranded) with ferrule with plastic sleeve | 0.14 mm² | 0.14 mm² | |||||||
| Maximum conductor cross Section (flex., stranded) with ferrule with plastic sleeve | 0.75 mm² (1.5 mm²) | 2.5 mm² | |||||||
| Dimensions | A × 78 × 31.3 (Dimension A…8 pins: 9.2, 12 pins: 12.7,
16 pins: 16.2, 20 pins: 19.7, 40 pins: 37.2) |
A × 82.6 × 36.1 (Dimension A…8 pins: 12.6, 12 pins: 17.8,
16 pins: 23.0, 20 pins: 28.2, 40 pins: 54.2) |
|||||||
| IEC rated voltage | 500 V | 800 V | |||||||
| IEC rated current | 17.5 A/1.5 mm² | 24 A/2.5 mm² | |||||||
| Usage Group (UG) | B, C | D | B, C | ||||||
| UL rated voltage | 300 V | 51 to 150 V | 151 to 300 V | 301 to 600 V | 600 V | ||||
| UL rated current | 15 A/AWG14 (solid wires) 10 A/AWG16 | 15 A/AWG14 (solid wires) 10 A/AWG16 | 10 A/AWG16 | 5 A/AWG16-20 | 20 A/AWG12 (solid wire), 15 A/AWG14 | ||||
| Withstand voltage | 1,890 VAC for 1 min (leakage current: 1 mA max.) | 2,000 VAC for 1 min (leakage current: 1 mA max.) | |||||||
| End Cover | XW6E-COM1.5 | XW6E-COM2.5 | |||||||
| Special tool | XW4Z-00B | XW4Z-00B | |||||||
Performance
| Ambient temperature range | –40 to 55°C (with no condensation or icing) |
| Ambient humidity range | 5 to 95%RH |
| Insulating material | PA resin |
| Fire resistance | UL94 V-0 |
| Insertion durability | 50 times |
| Vibration resistance | 10 to 150 Hz, Acceleration of 50 m/s² for 80 min each in X, Y, and Z directions. |
| Shock resistance | 500 m/s² for 11 ms each in 6 directions 5 times |
| Ambient storage temperature | –40 to 85°C (with no condensation or icing) |
| Ambient storage humidity | 5 to 95%RH |